- Servicing Los Angeles County & Surrounding Areas
- FOLLOW US:
Fast, affordable, and expert plumbing services you can trust — serving Venice, Santa Monica, Inglewood, Hawthorne, Torrance, and more.
Hot water is essential for daily life — showers, laundry, dishes, and more — and when your water heater fails, everything slows down. At EZ Fix Plumbing & Drains, we provide full-spectrum water heater services across West L.A. and surrounding neighborhoods: installation, repairs, upgrades, and preventive maintenance. Whether your system is traditional, tankless, gas, or electric, we deliver reliable solutions and honest pricing so you never face a cold surprise.
We work with a wide range of water heating systems, including:
Conventional Tank Water Heaters — Gas or electric models that store hot water in a tank and maintain its temperature.
Tankless (On-Demand) Systems — Units that heat water only when needed, eliminating standby energy loss.
Hybrid / Heat Pump Water Heaters — Electric systems that pull heat from the air, offering higher efficiency in appropriate climates.
Replacement & Retrofit Systems — Upgrades from older, inefficient systems or changing fuel types (e.g. electric → gas)
No matter the make or model, our technicians are trained to install, repair, maintain, and upgrade water heaters correctly and safely.
Flat-rate, transparent pricing — You’ll know what you’re paying for before work starts.
Free estimate & inspection — We assess your current system, advise you of options, and propose what makes sense for your situation.
Owner-led oversight — Carlos Ramirez personally ensures the work meets code, safety, and durability standards.
Local experience — We understand plumbing challenges on the west side of L.A. — from space constraints to local building codes.
Comprehensive support — From new installs to maintenance and emergency repairs, we’ve got your water heating covered.
Water heaters may degrade or fail due to a number of issues. Some common signs that you need professional service:
Insufficient hot water — The unit no longer heats enough for your demand
Fluctuating water temperature — Water alternates between hot and cold without you changing settings
Strange noises — Rumbling, popping, or banging due to sediment buildup or scale
Leaks or pooling water — Around the base or connections of the heater
Rusty or discolored water — Indicating corrosion inside the tank or piping
Pilot light or ignition issues (for gas units) — The heater won’t ignite or maintain flame
Pressure relief valve drip — Could signal overpressure or valve failure
When you notice these, delaying repair can lead to more serious damage, flooding, or even full system failure.
If your water heater is aging or consistently problematic, replacement might be the best option. Our installation process includes:
Home Assessment & Load Calculation
We evaluate how much hot water your household uses (showers, appliances, fixtures) to size the new unit accurately.
Evaluate Supply & Fuel
For gas units, we inspect gas line capacity and venting. For electric units, we check voltage and breaker sizing.
Remove Old Unit
Safely disconnect plumbing, gas or electric connections, drains, venting, and remove the old heater with minimal damage to surrounding area.
Install New Unit
Mount the new heater, connect water lines, gas or electric supply, venting (if required), install safety components like temperature/pressure (T&P) relief valves, expansion tanks, and insulation.
System Testing
Pressure test, check for leaks, ignite pilot or energize electric elements, run the unit under load, and verify hot water flow to all fixtures.
Final Walkthrough & Customer Training
We explain how to use the new system, how to maintain it, safe settings, and when to call us for tune-ups.
Proper maintenance can extend your water heater’s life, improve efficiency, and help you avoid surprises. Some key steps include:
Flush the tank annually (or more frequently in high-mineral areas) — Sediment buildup reduces efficiency and can damage heating elements.
Inspect and test the T&P (temperature & pressure) relief valve — This safeguard must work properly to prevent pressure buildup.
Check and replace the anode rod when needed — The sacrificial rod helps prevent internal corrosion.
Set temperature to safe and efficient levels (commonly 120°F) — Higher temperatures may scald and use more energy.
Insulate pipes and heater where appropriate — Helps reduce heat loss and standby energy waste.
Check for leaks, corrosion, or rust — Early detection can prevent major damage.
Per Anaheim municipal guidelines and plumbing best practices, flushing out 1–2 gallons semiannually helps prevent scale in high-mineral water areas.
When planning a water heater service or replacement, several factors affect cost:
Size and capacity of heater (gallons, GPM)
Type (traditional tank vs tankless or hybrid)
Fuel type (gas, electric) and connected infrastructure
Venting complexity (chimney, direct-vent, power-vent)
Location and accessibility (attic, crawlspace, tight spaces)
Permit and inspection requirements
Material costs and safety components
Typical water heater replacements range widely depending on these factors — from relatively modest costs to more significant investments for advanced systems.
Traditional Tank Units — Good for households with consistent usage, installed in basements or utility spaces.
Tankless / On-Demand — Energy-efficient, compact, and ideal when you want a continuous supply of hot water without storing it.
Hybrid / Heat Pump Units — Use heat extraction to raise water temperature — highly efficient in warm climates.
High-Efficiency or Condensing Gas Units — Better efficiency and lower operating costs for modern homes.
We’ll help you compare up-front cost vs long-term energy savings to find the best fit.
Owner-led care and direct accountability
Flat-rate, upfront quotes with no surprise fees
Free initial diagnostics and recommendations
Local knowledge of Los Angeles plumbing challenges
Quality installations, repairs, and maintenance — all under one roof
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
At EZ Fix Plumbing & Drains, we believe great service should also come with great savings. That’s why we offer special coupons and discounts to help you get the plumbing solutions you need at a price you can afford.
